3D FX Transfers are the revolutionary prosthetic for your Halloween Costume or special event. No need for sticky glues anymore. These 3D transfers apply with water and are latex free. They look extremely realistic and blend seamlessly into your skin. You can use any kind of makeup that is a creme, liquid, water or alcohol activated. Fake Blood on these 3D FX Transfers will help achieve those realistic looks.

Instructions
Skin Prep : Skin must be clean and free of any makeup, hair, dirt or oils. 
Apply : Peel off the plastic film that contains the prosthesis then stick it back on the white cardboard upside down. Apply the prosthesis firmly to the cardboard, pressing down so that it is well glued. Cut out the contour of the prosthesis and remove the transparent film. Stick the prosthesis to your skin and wet the white cardboard. Wait 30 seconds then gently remove the cardboard from your skin. The prosthesis will be glued to your skin. Fix the corners with your fingers if necessary. Your prosthesis will be ready to be made up if necessary or to be soaked in fake blood for a more realistic effect. (Optional).
Removal : Before removing your FX Transfer, clean off all makeup and blood using warm water or cleanser. Next, very gently rub or pull up an edge of the FX Transfer and roll it onto itself forming a big sticky ball. Now use an adhesive remover or baby oil to remove remaining edges. Using skin wipes or a warm wet towel, rinse and wipe the skin. Please, be gentle to your skin.

Note : Some people may have sensitivities. Test by applying to the inside of the wrist and remove after 30 minutes. 

*This item is not a toy and may be unsuitable for children under 14 years of age. Do not use around eye area.

3D FX TRANSFERS - SPLIT SKIN is categorised COSTUMES / MAKE UP AND PROSTHETICS / PROSTHETICS and sold by l'Imaginaire, a store and specialised website.